# How to enable settings in android device?

To effectively automate testing on Android devices, you'll need to configure your device and set up the necessary tools. 

In this section, we'll walk you through the essential steps to setup any android device required for automation in SimplifyQA.

### Samsung

* Developer options

  * Go to Settings >About Phone

  <figure><img src="/files/rkVkxigXDPvDUIxPnJxi" alt="" width="255"><figcaption></figcaption></figure>

  * Tap Software Info > Build Number

    <figure><img src="/files/1PURFA8FyjbWXXFXScwz" alt="" width="255"><figcaption></figcaption></figure>
  * Tap Build Number seven times. After the first few taps, you should see the steps counting down until you unlock the developer options. You may also have to tap in your PIN for verification.

  <figure><img src="/files/cObeVQVinu9zsXHj2KBV" alt="" width="255"><figcaption></figcaption></figure>
* Next, navigate to Settings > Developer Options and turn on the Developer Options.

<figure><img src="/files/ECVraYwCW5BrNxjnEcl1" alt="" width="257"><figcaption></figcaption></figure>

* Now, enable the following settings in the Developer Options section.
  * USB debugging
  * Install via USB
  * USB debugging (Security settings)
  * Wireless display certification
  * Enable Wi-Fi verbose logging
  * Wi-Fi scan throttling
  * Adaptive notification priority
  * Stay awake
  * Verify bytecode of debuggable apps

<figure><img src="/files/lmVmaIurkQfM99xm7gmJ" alt="" width="257"><figcaption></figcaption></figure>

<figure><img src="/files/jsdkFM3tFjAXz7SP00LN" alt="" width="255"><figcaption></figcaption></figure>

<figure><img src="/files/gZlBa0OwoSAo3jlaI39n" alt="" width="258"><figcaption></figcaption></figure>

<figure><img src="/files/kUGAlRNcsdOYs77Ojrpv" alt="" width="260"><figcaption></figcaption></figure>

<figure><img src="/files/uETI5b6DTGq13Fk68ARd" alt="" width="255"><figcaption></figcaption></figure>

### Xiaomi Redmi

* Developer options
  * Go to Settings >About Phone > MIUI version
  * Tap on “MIUI version” for 7 times until developer mode appears

<figure><img src="/files/nOj12SXrckvr43y4Oxlb" alt="" width="258"><figcaption></figcaption></figure>

* Next, navigate to Settings > Additional Settings > Developer Options and turn on the Developer Options option.

<figure><img src="/files/FzFvtK2Y0PB8xbWnTjSG" alt="" width="255"><figcaption></figcaption></figure>

* Now, enable the following settings in the Developer Options section.
  * Stay awake
  * OEM unlocking
  * USB debugging
  * Install via USB
  * USB debugging(security settings)
  * Wireless display certification
  * Wi-Fi scan throttling
  * Tethering hardware acceleration
  * Verify bytecode of debuggable apps

<figure><img src="/files/H2x2vUFlefNtq8CNSehi" alt="" width="255"><figcaption></figcaption></figure>

<figure><img src="/files/uiAvDcHP6crbXum2FG38" alt="" width="255"><figcaption></figcaption></figure>

<figure><img src="/files/Yg1uVTLu3F7OkCCMkYEJ" alt="" width="255"><figcaption></figcaption></figure>

<figure><img src="/files/VSy8IoR3X2sD9vXdNhaA" alt="" width="255"><figcaption></figcaption></figure>

### Oppo

* Developer options
  * Go to Settings >About Phone
  * Tap on Software Info > Build Number.
  * Tap Build Number seven times.

<figure><img src="/files/Y1sf897SztCofwnHDJeS" alt="" width="257"><figcaption></figcaption></figure>

* Next, navigate to Settings >Developer Options and turn on the Developer Options option.
* Now, enable the following settings in the Developer Options section.
  * USB debugging
  * Verify bytecode of debuggable apps
  * Disable Permission monitoring
  * Show surface updates
  * Wi-Fi scan throttling
  * Mobile data always active
  * Enable absolute volume

<figure><img src="/files/JqrozKZiK0uZSq5Ju66o" alt="" width="260"><figcaption></figcaption></figure>

<figure><img src="/files/5rIWVnHNPvPqWIirNTYk" alt="" width="255"><figcaption></figcaption></figure>

<figure><img src="/files/g6kGycEXxX11CQt7KweK" alt="" width="255"><figcaption></figcaption></figure>

<figure><img src="/files/yYmGkTdD6eEAtPu4Vqz0" alt="" width="257"><figcaption></figcaption></figure>

<figure><img src="/files/Jbnj0544QO2hm2DxwJYF" alt="" width="257"><figcaption></figcaption></figure>

### Huawei

* Developer options
  * Go to Settings >About Phone
  * Tap on Software Info > Build Number
  * Tap Build Number seven times

<figure><img src="/files/X2wXSpc3IdgMEev2svoU" alt="" width="255"><figcaption></figcaption></figure>

* Next, navigate to Settings >Developer Options and turn on the Developer Options option.
* Now, enable the following settings in the Developer Options section.
  * Stay awake
  * Enable OEM unlock
  * USB debugging
  * Always prompt when connecting to USB
  * Allow ADB debugging in charge only mode

<figure><img src="/files/PvY0DlfPtJpSnpCSedWK" alt="" width="255"><figcaption></figcaption></figure>

<figure><img src="/files/LuVu4IebK9OoiYWGEEQ1" alt="" width="255"><figcaption></figcaption></figure>

### Vivo

* Go to Settings>My Device
* Click on More Parameters. Tap on Software version 7-10 times.

<figure><img src="/files/zyAv6v9oLg9ZM1y187r3" alt="" width="255"><figcaption></figcaption></figure>

<figure><img src="/files/bx16bw0Mggv01b55VPcN" alt="" width="260"><figcaption></figcaption></figure>

* Next, navigate to Settings > Developer Options and turn on the Developer Options option.

<figure><img src="/files/h0JURYUg1W4mTpJqVL15" alt="" width="255"><figcaption></figcaption></figure>

* Now, enable the following settings in the Developer Options section.
  * USB debugging
  * Disable Bluetooth A2DP hardware offload
  * OEM unlocking

<figure><img src="/files/uUsTmS8gDCpK2TJsef36" alt="" width="254"><figcaption></figcaption></figure>

<figure><img src="/files/umbIYVMJqwEQVXB23IkE" alt="" width="255"><figcaption></figcaption></figure>

### One Plus

Developer options

* Go to Settings >About Phone
* Tap on Software Info > Build Number
* Tap Build Number seven times

<figure><img src="/files/piLCnD7ccgZtlGi3DPXf" alt="" width="173"><figcaption></figcaption></figure>

* Now, enable the following settings in the Developer Options section.
  * OEM Unlocking
  * USB Debugging
  * Navigate to Default USB configuration in developer options and choose File Transfer

<figure><img src="/files/yT6fmEE5pXuMByMyIrF8" alt="" width="173"><figcaption></figcaption></figure>

<figure><img src="/files/DMknSpQYginnn49Ub9b4" alt="" width="170"><figcaption></figcaption></figure>

<figure><img src="/files/81pnQUpcMq9ukKwxozkG" alt="" width="170"><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.simplifyqa.ai/simplifyqa-installation-and-setup/setup-android-device/how-to-enable-settings-in-android-device.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.